Our solutions use the most advanced technologies to guarantee ideal PV module performance.

Sun Simulator

Description

This machine performs a simple and direct serial resistance assessment to calculate the module’s power, then stores the measurement on the machine’s computer and prints the module label with its barcode and measured power.

Main Features

  • A+A+A+ simulators
  • Maximum spectrum range 300-1200 nm
  • Xenon or LED technology
  • Total irradiance range 200-1200 W/m2
  • IEC Standard
  • Cycle time < 20 seconds
  • Easy integration with the MES system

Module technologies

  • Cell types: HJT, TopCon, Mono-PERC and POLY
  • Frame and frameless modules
  • Full and cut-cells
  • Monofacial and bifacial modules

EL Machine

Description

The EL inspection system is equipped with high-definition cameras, enabling easy identification of defects, such as micro cracks, dark areas, finger problems and short-circuits.

Main Features

  • Fast and easy image acquisition
  • Autochecking software
  • Cycle time < 20 seconds
  • Accuracy: 1px = 0.17 mm
  • Easy integration with the MES system

Module technologies

  • Cell types: HJT, TopCon, Mono-PERC and POLY
  • Frame and frameless modules
  • Full and cut-cells
  • Monofacial and bifacial modules

Hipot Inspection

Description

This equipment performs electrical isolation tests on the panel.

Main Features

  • IEC Standard
  • The following test types can be performed:
    • Dielectric resistance
    • Continuity and efficiency tests
    • Insulation resistance
  • Easy integration with the MES system

Module technologies

  • Frame and frameless modules

Visual inspection

Description

Automatic or manual module inspection to ensure quality before the EOL test.

Main Features

  • Manual or automatic option
  • Easy integration with the MES system
  • Cell matrix alignment checking
  • Cell breakage checking
Contact Us Newsletter